Flash2Pass Automatic Garage Door Opener

Safe, Simple, Secure!
The Flash2Pass Automatic Garage Door Opener replaces your push-button garage door opener by automatically integrating your garage door remote into your high-beam switch. Two simple clicks of the high-beam and your garage door opens. Easy as pie!

Click the "F.A.Q." tab above for frequently asked questions about the Flash2Pass system.

• A double flash of your headlight high beams opens or closes your garage door
• A small one time investment gets you the maintenance free system
• No remote transmitter to get stolen or lost
• No battery to buy or replace…Flash2Pass™ gets its power from your car
• Digital encrypted signal and rolling code technology for ultimate security
• Quick and easy do-it-yourself installation
• Up to six transmitters may operate a single receiver
• Additional receivers may be installed elsewhere and programmed to your Flash2Pass™ equipped vehicle
• Works with virtually any garage door opener manufactured since 1982

The Transmitter is a small (2" x 2" x 3/4") radio frequency device that is mounted under the hood of the car with either the enclosed screws, or the plastic zip tie. The wires are attached with Posi-Tap™ connectors to the headlight high beam positive wire and to the ground wire. The Flash2Pass transmitter is non-polarized so you can attach either wire to the headlight wires.

The Flash2Pass receiver is designed to replace the pushbutton inside your garage. If you have additional functions on your pushbutton that you would like to keep, the receiver can be installed next to your original pushbutton and “piggybacked” to it.

The Flash2Pass transmitter and receiver are packaged as a set that is pre-programmed at the factory, or they are available individually. For instance, if you had a two-car garage with one large door for both bays, you would buy one set and an additional transmitter. The additional transmitter would be installed in the second vehicle and the receiver programmed to accept it.