| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
 |
|
| Fire and Ice |
|
| Posted 10/12/2009 by JWagner |
Original post: 10/18/2007
Way better quality then the all red light bar. Had to use there 60 day warrantee a few times, but with the Fire and Ice it has lasted over a year and a half. Even transfered it from vehicles. These are the only source of taillights, turn signals and reverse lights on the back of my Dakota, and I wouldn't go with someone I personally wouldn't recommend. Also, if you shave your taillights and use this as your only source of rear lighting, check local laws, and use small DOT reflectors, since you are required to have one on each corner of the vehicle.
Edit: 10/12/09
Just like to add almost 2 years later, and still going strong! |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
4 |
|
| |
Installation: |
|
2 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Fire and Ice L.E.D. bar |
|
| Posted 10/26/2007 by 1eleanor |
| The installation was the easy part, the only item that will be optional to purchase is a roll of 3M tape to safely secure the bar in place, other than that be prepared to turn heads day and night!! |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Wow!! |
|
| Posted 11/30/2007 by bvice |
| The first shipment had to be returned because it was broken in shipping. A replacement shipment was sent immediately. The light bar was extremely easy to install on the back of my Dodge Ram. It looks great, and really catches the eye, especially the brightness of the backup lights. My son likes it so much, he has hinted for one of these for his truck, as a Christmas gift! |
|
|
|
|
| |
Quality: |
|
3 |
|
| |
Features: |
|
3 |
|
| |
Installation: |
|
1 |
|
| |
Appearance: |
|
3 |
|
|
|
|
|
|
| Won't fit trucks with hole between bumper & tailgate needed to lower spare tire |
|
| Posted 12/5/2007 by Don O'Connell |
| Take note if you own a 2006 Dodge Ram or another with the same spare tire lowering system. If you properly position this where it can be seen (which is the point) you will cover the hole necessary to insert the rod to lower your spare tire. I could have mounted it above this hole but it would have been blocked by the tailgate. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Perfect... |
|
| Posted 10/8/2008 by Silver08rado |
Fire and Ice, who would have thought they would go so good together.
I've had this light bar for about 4 months now and I love it, so many compliments and the added security of "I know they can see me now" for those jerks that like to follow ridiculously close to you. Installation was decent, directions only showed you really how to hard wire it to your harness which if you have any idea of how those work it is pretty simple. Since I have a new truck I didn't want to cut and tape and all of that "quick fix" stuff so I went out and bought some of those harness clips that splice it together and seal it from the weather, I recommend those as well.
The tape on those things are so sticky its almost a painstaking process to get them not to stick when you're trying to fit it so them falling off is out of the question. I've heard of cd's for spacers, I tried it...its okay but I got it straight with just eying it up and taking my time.
Installation is about 15-30 minutes if you know what you're doing by yourself, can't complain, it looks awesome. The L.e.d shines in night and day. If you're thinking about getting this product, then stop looking and just buy it, you wont be disappointed.
|
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Fire & Ice Bar - 48" |
|
| Posted 10/17/2008 by msmaness |
| This product looks great and is very easy to install. You do have to hard wire the reverse lights, but is very simple to do. It worked great with the Sir Michaels Roll Pan I had installed and everybody stops me to inquire where to get one. Thanks |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
4 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| INSTALLED ON TRAILER RAMP |
|
| Posted 10/21/2008 by Mr_Geo |
| I'm a landscaper and wanted to let drivers behind me know if I was braking or turning, particularly tailgaters. I have a trailer with brake/turn signals that are low to the ground and tailgaters can't see what I'm going to do. My trailer gate has "L" beams that run vertically so I drilled holes through them and installed the LED Light bar at the top of my ramp. If you plan on doing the same, know that you will need to buy a metal hole saw, extra wiring, and possibly an extra 5-pin plug to hook up to your vehicle's wiring. The LED Light bar has worked perfectly, even with all of the jarring that trailers get from bouncing over potholes. I highly recommend people using trailers to augment their lighting with a LED Light Bar. The LED will not burn out from vibration like typical incandescent lights so you have added assurance that drivers know what you are doing at all times. I purchased a 60" Light Bar as well, and plan to install on my new truck for added assurance that those behind me know what I am doing. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| NO more REAR ENDED !! |
|
| Posted 10/24/2008 by singledude39 |
| 08 GMC Sierra, I just plugged it in and wired the reverse lights into the white wire on the factory plug, works great ~~ only downside is when the headlights are on, its just a clearance lights, but when the lights are off, the signals blink with direction, and stop lamp works, and reverse is all white... |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Very Cooolllllll !!!! |
|
| Posted 6/18/2009 by cowboybilly |
| I installed the Fire&Ice light bar on my 08 Silverado. It looks and works great. I have a warranty on my truck and did not want to hard wire this in. So I bought a 7 to 4 flat adaptor and that works great. But now I have a utility trailer and I still want to keep my warranty intact. So, I have decided to buy the Fire & Ice light bar set for the trailer and use a multi-tow adaptor 7rv to a 4 & 5 flat. We are going to change the 4 flat on the trailer to a 5 flat by using the white wire for back up lamps. I hope this will help some of you. I love my light bar. It's is awesome ansd so cool! |
| Stylin Trucks response posted on 6/19/2009 |
| Hard wiring the light bar will not void any factory warranty |
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Fire & Ice LED Light Bar 48" |
|
| Posted 7/7/2009 by SCUTURIO_JMS |
As a Satisfied Customer of StylinTrucks I had purchased many items (Listed Below)
.Fire & Ice LED Light Bar 48"
Installed with my parking lights that is
mounted under my Tool-Box Cover that is
controlled by a toggle switch that is
installed inside on the dash board.
.Fire & Ice LED Lght Bar 60"
Installed with my parking lights that is
mounted under my Tail-Gate.
.Luma Flex LED Strips
(Blue) Installed under the Wheel-Wells
that is connected on mt interior dome
light.
(White) Installed under the Bed-Rails
The Fire & Ice LED Light Bar is an phenomenal product that I recommend anyone to purchase which they will be a
satified customer.
The Luma Flex LED Strips is a great product but, does have a fault which is very hard to see durning the daylight.
At night this product is great which displays it's true purpose which will make any customer very satified.
Thank You,
Joseph M. Scuturio |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| 60" Fire and Ice O7 Dodge Ram |
|
| Posted 7/22/2009 by tonydawg9 |
| With the my 07 Dodge Ram had to install it on edge of tailgate so it wouldnt block spare tire hole. Looks great I have a black decal around tailgate blends perfect.... All in 20 minutes. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Fire and Ice |
|
| Posted 4/29/2007 by yamahajimmy |
| Very nice product catches everybody's eyes especially in reverse |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Cool Product |
|
| Posted 5/16/2007 by bobcat |
| Easy install. Looks Great & gets lots of attention. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
3 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Very Nice |
|
| Posted 5/23/2007 by mwatsr |
| Looks and shows up nice against my black Sierra. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
|
|
| Posted 6/2/2007 by Gilbert |
Look`s Great,Easy Install. Picked up a T-HARNASS at U-HAUL $15.00,layed a 3/8" board on bumper to center LIGHT BAR between tail gate and bumper,mark a center with painter`s tape and sharpie on tail gate, with sharpie mark LIGHT BAR center 30" for 60",24" for 48",remove tape, slide on board, press frimly DONE. ABOUT 30 MIN`S
P.S. Make sure surface is clean! I used alcohol |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
|
|
| Posted 12/10/2008 by KenNavy |
| It looks great and people who see it thinks its really sets the truck off. I'm starting to see more trucks with this on their trucks. That is the reason I ordered for my truck, because I saw it on another truck and I liked the way it looked. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
4 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
|
|
| Posted 3/21/2009 by dwike865 |
| Installed this on a 09 Dodge Ram 1500. Took tailgate off, lined CD cases along the bumper, layed light bar across cases, and secured. Fits perfect, tailgate clears nicely. Hardwiring to the RAM is tricky, left it thru the harness and hardwired to back up lights was real easy. Looks awsome!!!!!! |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Fire and ice |
|
| Posted 4/15/2009 by hart63 |
| Exceptional add on. Looks very good |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
4 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| great product |
|
| Posted 6/26/2007 by Stevo84 |
| Great shipping, great product, and easy to install except for one issue. The manufacturer labeled the product wrong so it was installed backwards the first time. Other than that, it looks and works great! |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Fire and Ice Light Bar |
|
| Posted 6/28/2007 by ron stacy |
| This is the greatest thing that was ever invented for lights. So easy to install, 5 minutes done just use the plug and your on. Thanks |
|
|
|
|