| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
 |
|
| Fire and Ice |
|
| Posted 10/12/2009 by JWagner |
Original post: 10/18/2007
Way better quality then the all red light bar. Had to use there 60 day warrantee a few times, but with the Fire and Ice it has lasted over a year and a half. Even transfered it from vehicles. These are the only source of taillights, turn signals and reverse lights on the back of my Dakota, and I wouldn't go with someone I personally wouldn't recommend. Also, if you shave your taillights and use this as your only source of rear lighting, check local laws, and use small DOT reflectors, since you are required to have one on each corner of the vehicle.
Edit: 10/12/09
Just like to add almost 2 years later, and still going strong! |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
4 |
|
| |
Installation: |
|
2 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Fire and Ice L.E.D. bar |
|
| Posted 10/26/2007 by 1eleanor |
| The installation was the easy part, the only item that will be optional to purchase is a roll of 3M tape to safely secure the bar in place, other than that be prepared to turn heads day and night!! |
|
|
|
|
| |
Quality: |
|
4 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Great customer Service A++++ |
|
| Posted 11/28/2007 by suzuki14258 |
| Looks great, love the back up lights, gets lots of attention.... |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Wow!! |
|
| Posted 11/30/2007 by bvice |
| The first shipment had to be returned because it was broken in shipping. A replacement shipment was sent immediately. The light bar was extremely easy to install on the back of my Dodge Ram. It looks great, and really catches the eye, especially the brightness of the backup lights. My son likes it so much, he has hinted for one of these for his truck, as a Christmas gift! |
|
|
|
|
| |
Quality: |
|
3 |
|
| |
Features: |
|
3 |
|
| |
Installation: |
|
1 |
|
| |
Appearance: |
|
3 |
|
|
|
|
|
|
| Won't fit trucks with hole between bumper & tailgate needed to lower spare tire |
|
| Posted 12/5/2007 by Don O'Connell |
| Take note if you own a 2006 Dodge Ram or another with the same spare tire lowering system. If you properly position this where it can be seen (which is the point) you will cover the hole necessary to insert the rod to lower your spare tire. I could have mounted it above this hole but it would have been blocked by the tailgate. |
|
|
|
|
| |
Quality: |
|
0 |
|
| |
Features: |
|
0 |
|
| |
Installation: |
|
1 |
|
| |
Appearance: |
|
0 |
|
|
|
|
|
|
| Fire and Ice L.E.D. |
|
| Posted 12/7/2007 by dicknorton |
| I purchased this for a 2006 Ford F150 FX4. I called and was told it would fit. Well, it does not as a bar that is in the tailgate that stops it from dropping beyond horizontal will strike the light. |
| Stylin Trucks response posted on 12/7/2007 |
| On this particular vehicle, there is a small nub that can be removed for additional clearance. |
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
|
|
| Posted 12/7/2007 by nutts53 |
| Makes the back of your truck more noticeable and the extra brake and signal lights make driving safer. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
4 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Fire and Ice LED Light Bar |
|
| Posted 12/10/2007 by S10Reaper |
| Installation was a little rough, but my lighting has inproved greatly. I've noticed people don't tailgate as much. Also, I can backup easier. So far it's the best accessory I've bought. |
|
|
|
|
| |
Quality: |
|
4 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
4 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Nice light bar and easy to install |
|
| Posted 12/10/2007 by Roger_Ea@email.com |
| Very bright and easy to install. The back-up light feature is cool. Two thumbs up on this light bar! |
|
|
|
|
| |
Quality: |
|
3 |
|
| |
Features: |
|
3 |
|
| |
Installation: |
|
1 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Please post a note about the nub on the tailgate!! |
|
| Posted 12/12/2007 by carnut57 |
Well It looked good till the first time I opened and closed the tailgate!! There is a nub on the bottom of the tailgate that cracked mine and now it dosen't work!! Ford owners would like to know this before they spend this kind of money to break something!!
Please post something on the website so the next 04 up ford F150 owner that buys one knows he is going to have to cut something off his truck to make it work!! I'm really disappointed to have spent this money and break something that fast!!!!!!! |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Great Product!!! |
|
| Posted 12/12/2007 by big_noble |
| Installation was very easy. Looks very cool.Really like the back up feature. Great product. Always am getting asked where I got it. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
4 |
|
| |
Installation: |
|
3 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| NIce Light Bar |
|
| Posted 12/17/2007 by the2larues |
| This light bar was a bit difficult to install on my Titan. The factory 3M tape was quite limited and would not stick to the area below the tailgate but I think that was mainly due to the spray on bedliner. I had to take the factory tape off and put some 3M tape on for the entire length of the light bar and then I had to notch the light bar to fit around the access hole for my spare tire. It was a lot more work than I had anticipated but it looks great. |
|
|
|
|
| |
Quality: |
|
3 |
|
| |
Features: |
|
3 |
|
| |
Installation: |
|
3 |
|
| |
Appearance: |
|
0 |
|
|
|
|
|
|
| promises not delivered. |
|
| Posted 12/17/2007 by tondoboy561 |
| Mine does not change to white color when i back up. It supposed to come with free headlight bulbs but did not. Overall it's ok product since it puts more lights the back of my truck. |
| Stylin Trucks response posted on 12/18/2007 |
| For the backup light to work, you need to wire the light bar to the backup lights wire. Once you do that they will work when in reverse. |
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
4 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
|
|
| Posted 12/19/2007 by dunner8 |
| I purchased the light bar mid-summer 2007. Installation was fairly easy, you do need to hard wire the reverse light. Recently the left side LED's burned out, I called up Stylin Truck's customer service and they really took care of me. Even though the light bar was a few months old, they are replacing it! This is why I am a returning customer, and will recommend to all! Thanks Stylin Trucks! |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
4 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| MAGNIFICO!!!!!! |
|
| Posted 12/19/2007 by bgmiket |
| I was very happy with my light bar. However, when the directions said to put the white reverse wire on it was not clear exactly how to do it. So, if anyone has trouble with the instalation of the reverse wire just take off the driver's side tail light and reverse light bulb, use a light bulb tester to find live wire while someone puts the vehicle in reverse. Oh yah, make sure they hold the brake too. Then, slice wire just enough to show some bare wire,connect white wire to reverse wire. Then tape securely together. Sounds like alot, but it went pretty smoothly. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
4 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Great Light |
|
| Posted 12/21/2007 by kooldodge |
| I really like the look and functions of this light,The more light out back the better. Installation was fairly easy with the exception of the spare tire crank down hole on my dodge but it will fit. For the reverse light we tapped into the round seven pronge harness in the bumper,the center is the back-up wire. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| SO FAR SO GOOD |
|
| Posted 12/23/2007 by mrbiggz |
| I purchased this product in November of 07'.So far i have no complaints,only compliments.I like the all white led feature when i start my truck up,even though my headlights are not on.It is very visible even in the day time.Two thumbs up on this item. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
4 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Great Product and easy to install |
|
| Posted 12/27/2007 by ricky828 |
| Looks great and works perfect. For any one installing make sure your tail gate opens and closes with out hitting the light bar before taping. I ending up taking the tape off the back and mounting in more flush to fit with ease. Other than that instalation went great. |
|
|
|
|
| |
Quality: |
|
3 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| lightbar |
|
| Posted 12/27/2007 by redman55 |
| after about 3 weeks some of the bulbs work now and then.not real good qualith. dont know if the warrenty covers this or not. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
|
|
| Posted 12/30/2007 by delort530 |
| very nice item. easy to install but check for clearence when opening tailgate if you have a roll pan. |
|
|
|
|
| |
Quality: |
|
4 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
4 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Good Looking Light Bar, But! |
|
| Posted 12/30/2007 by cocno1 |
| I Have a 2003 Dodge Ram 1500 4X4 and I will tell you that you have to mount the light bar up a little higher than you normally would so that you can get your jack implement into the hole that lowers down your spare tire! Then you have to be careful not to mount it to high or when you lower your tailgate it will hit the light bar and maybe damage it! I moved mine up a little and then cut a little piece out of the hard rubber gromet that goes around the spare tire hole so the bar you use to lower the spare tire would still slide in thru the hole, or you can remove the hard rubber gromet all together before installing the light bar! I got mine on though and it looks great! I really like the reverse light function at night! One more thing the instructions doesn't tell you is that you have to splice into your reverse light wiring! I called my local Dodge service dept. and got them to tell me the wire to splice into which for my year truck it was a violet with black stripe! Hope this helps! |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
4 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Fire and Ice Lightbar |
|
| Posted 12/31/2007 by meekma101 |
| The installation was a breeze, I purchased one for my truck and got so many comments on it, I purchased one for my brother for Christmas because he liked it so much, any truck that I own will have one of these automacically. I love it |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| 2007 gmc caynon |
|
| Posted 6/11/2008 by kennyg |
| Light bar looks good but if you own a 2004-2007 gmc caynon you will notice when you put the brakes on at the same time as the turn signals it will blink opposite of the taillight it is not a fault in the light bar it is the way these trucks are built. they have seperate turn from brake. gm is trying to come up with a fix to the problem for these trucks that have a factory tow package. Gm has advised me to hard wire it before the trailer harness to fix this problem. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
|
|
| Posted 1/3/2008 by lottner |
| This was an awesome way to sport my 02 Silverado up. It took me every bit of 15 minutes to install. Just READ the instructions when hooking up the reverse lights. Couldn't be any easier. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Nice!! |
|
| Posted 1/3/2008 by crzybil |
| It was very easy to install, it plugged right into the wiring harness, and it just simply added that look to my lifted truck |
|
|
|
|
| |
Quality: |
|
4 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| So far very good |
|
| Posted 1/5/2008 by arock96 |
| Easy to install. Looks great works great.. I did see some with couple leds out on other trucks. Hopefull mine will hold up. so far so good. |
|
|
|
|
| |
Quality: |
|
4 |
|
| |
Features: |
|
4 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
|
|
| Posted 1/6/2008 by jasont |
| i have a 2000 ford ranger and it looks good all the time. hook up was easy, will buy again. thanks |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
4 |
|
| |
Installation: |
|
4 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
|
|
| Posted 1/7/2008 by canirewind |
| I installed this on my brothers 1998 Chevy Silverado. The hardest part of installation was adhering the light stick straight on the truck. I hard wired this light and total time for installation was an hour and a half. GREAT lighting especially the white LEDs for backup. Good product good price. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
|
|
| Posted 1/7/2008 by jmcarwyle |
| i got a 2000 dodge dakota r/t it looks good on the truck but the only thing is it will not fit between the tailgate and bumper so i mounted it right below my backglass |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
|
|
| Posted 1/8/2008 by dwyoung |
| I bought this for my son for Christmas, it looks great on his Silverado...he loves and so do I. A great safety feature. Installation was easy. Great service and fast shipping. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
3 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Great Bar, a little tricky on install |
|
| Posted 1/9/2008 by hlawrimore |
| I love the light bar, I just wish that it came with some splicing instructions and conectors. I hardwired it to my lights, that way I did not tie up the trailor light plug. However, I fortunatly had my own splicing equipment and conectors so I figured it out. The instructions could be a little more detailed on the splicing aspect. |
|
|
|
|
| |
Quality: |
|
4 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
4 |
|
| |
Appearance: |
|
3 |
|
|
|
|
|
|
|
|
| Posted 1/11/2008 by CHEVYMANE |
| ON MY 3RD ONE. FIRST TAIL LIGHTING WENT OUT (AFTER CALL TO PLASMAGLOW, WAS TOLD TO INSTALL RESISTOR OR HARDWIRE TO MAKE TAILLIGHTS MORE DIM SO BRAKE LIGHTS & TURN SIGNALS ARE BRIGHTER.SECOND ONE MELTED @ END NEAR WIRE/LIGHT CONNECTION. I'LL KEEP REPLACING W/LIFETIME WARRANTY. LOVE IT TOO MUCH (& THE STARES) TO GIVE UP. 99 TAHOE W/TAILGATE. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Great Lightbar! |
|
| Posted 1/11/2008 by jolynch57 |
| I bought this for my son on Christmas. Easy install and it really looks good. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Fire & Ice light bar |
|
| Posted 1/14/2008 by marshalljr21 |
| Light bar looks great, easy install. The reverse lights on the bar need to be hardwired (Very easy if you have any electrical skills). And I would just use the trailer hitch adapter because if you have a trailer on the vehicle you wont see the light bar. GREAT PORDUCT, WOULD DEFFINATLY RECCOMEND TO ANYONE. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Awesome light bar!! |
|
| Posted 1/14/2008 by jshores3 |
| I recently received my Fire & Ice 60" light bar for my 2004 Dodge Ram 3500 dually. A friend had gotten one prior to me and gave me some good tips along with reading all the comments left by customers. For this model truck I do recommend you notch the grommet covering the spare tire raise/lower mechanism. Also if you will place a CD case on the bumper and slide the light bar in to the area under the tailgate and it will be perfectly lined up. Overall this is an awesome product. Installation took approximately 30 minutes... maybe if you count the time it took to take off the taillight assembly, clean the area where I was going to put the light bar, and make sure the light bar was centered. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| light bar |
|
| Posted 1/15/2008 by paebob |
This is just right for my truck,i drive the highway alot, you will get noticed,but dont put in reverse at the red light,everybody freak's out,it's brite
easy to install, easyest way that i found out. is to remove tail gate, it goes on straight,and on a ford just trim out around steel pin hole..... |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Great light bar Highly visible even when dirty |
|
| Posted 1/20/2008 by raysed |
| Installation of this product is a real no-brainer. Even a quick look at the directions will get you where you need to go. I took the extra time to wire it directly, which is very easy with the pre-punched/drilled holes in the tail light mounts. Total install time was less than 25 minutes. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
4 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| onr of the best things i ever bought for my truck |
|
| Posted 1/29/2008 by badblu2 |
| i did not have a bit of problem installing the light, i had to buy an adaptor for the hitch but other than that i had no problem, the light really looks good on my silverado. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| awesome |
|
| Posted 1/30/2008 by coravec |
| Have gotten tons of compliments on my new tailight bar. Price was reasonable and it was shipped to my house in less than a week. Great product. Thanks |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
4 |
|
| |
Installation: |
|
4 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
|
|
| Posted 2/3/2008 by ARTSCH869 |
| I INSTALLED THE 60 " BAR ON MY 2006 CHEVY SILVERNADO . THIS LIGHT BAR COULD BE IMPROVED BY HAVING BLADE PLUG-IN ON THE END OF THE WHITE WIRE AND A NEW STYLE QUICK WIRE SPLICE CONNECTOR FOR THE BACK-UP WIRE CONNECTION [ REFERENCE THE CONNECTORS ON THE HIGH-4 LIGHT KIT ] ALSO , THE WHITE BACK-UP BULBS COULD BE BRIGHTER . ONCE INSTALLED THE LIGHT BAR WORKED GOOD |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
1 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
| Very Happy |
|
| Posted 2/3/2008 by Jeffboocr |
I love it, it's bright, and it really set's my Avalanche above others. Installation though was a different matter. You have two choices. First, buy and adapter that you can't lock down that sticks out, and could be easily stolen (eyesore). Second, you have to get up under and hard wire it in with no directions on how to do that. That would have been nice to know ahead of time. The adhesive also does not work on the Avalanche, because the truck doesn't have enough surface where the unmovable 3m tape is. So I again had to find additional solutions and spend more money. That issue may be Avalanche/year specific, I am not sure.
Still, I would buy it again. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
|
|
| Posted 2/6/2008 by bullet32169 |
| Great Light bar to add to any truck or SUV. I put it on a Bagged 1996 Dodge Ram. Mounted it to the back glass of the truck. |
|
|
|
|
| |
Quality: |
|
5 |
|
| |
Features: |
|
5 |
|
| |
Installation: |
|
5 |
|
| |
Appearance: |
|
5 |
|
|
|
|
|
|
|
|
| Posted 2/12/2008 by pikappbx330 |
WOW!!! What a great product! Easy to install, works great and looks cool. Great product.
Edwin H.
Arlington, TX |
|
|
|
|